Remove The Dishwasher – This Is How It Works

Removing the dishwasher: the preparation

If you want to move, you should first clean your dishwasher. If your device is broken, this step is not necessary.

  1. First, clean and descale your dishwasher. Use a descaler and cleaning agent for this. Clean the nets and co. of food leftovers. Then run the dishwasher empty so that it cleans itself.
  2. Turn off the water supply. Then pull out the mains plug and the waste water hose. Then close the siphon with a piece of cloth or a blind plug.
  3. If there is still water in the hose, allow it to run into a sink or bucket before capping the opening.
  4. An under-counter dishwasher can but does not have to be attached. Built-in dishwashers, on the other hand, have different attachments. As a rule, dishwashers are attached to the top with two steel brackets or sheet steel plates. In this way, the device is screwed to the worktop.

Removing the dishwasher from the built-in cupboard: This is how it works

Depending on the design of your dishwasher, it can be attached differently. As a rule, a distinction is made between a built-in dishwasher, a free-standing dishwasher, and an under-counter dishwasher.

  1. Take a close look at how your device is attached to the countertop. Remove the screws and pull the dishwasher out from under the countertop. Have another person help you.
  2. Remove the front panel. It should be easy to remove. Some built-in dishwashers can do without a front panel. A front panel usually has the same decor as your worktop. This is how you can recognize them.
  3. Your dishwasher may be screwed to the worktop below. Some devices are only mounted with silicone. If you have a worktop made of natural stone, this is more likely to be the case. Remove the silicone seal on your dishwasher before unplugging it.
  4. Make sure that you do not damage the hoses or the aqua stop box when removing. Do this with care.

Leave a Comment

Your email address will not be published.

Scroll to Top