Emma Miller
A new bathtub is always snow-white, but in this condition, it does not last long – poor water quality and regular use of the bathtub are the causes of multiple layers of dirt.
How to clean the bath with folk remedies from soap scum
Soaps, shampoos, shower gels, and any grooming products accumulate on the surface of the bath and form an ugly film. Such a coating – is a perfect breeding ground for bacteria, so, it is necessary to scrub it off. In this case, you will be helped by baking soda, and the technology of its application is very simple:
- moisten the surface of the bathtub with water;
- dilute the baking soda with water in a container until it becomes a pulp;
- Apply the mixture with a sponge to the bathtub;
- Leave it for half an hour, then scrub thoroughly and rinse off.
If you regularly carry out such a procedure, then the question of what is the best way to clean the tub will disappear by itself, because baking soda will be your best helper.
How to clean limescale from a bathtub – ways
Bad water causes the formation of lime scale – deposits of different salts and impurities on the surface of the tub. It is difficult to get rid of it, but it is possible – thanks to proven household remedies.
Option 1 – how to clean the tub with baking soda and vinegar
You need to mix 0.5 cups of baking soda, 0.5 cups of water, and 1 / 4 cup of vinegar. If your bathtub is acrylic, it is better to replace the vinegar with lemon juice. Apply the prepared solution to the surface of the bathtub and leave it for 1 hour. Wash off the detergent with a sponge, and then rinse the tub with water.
Option 2 – cleaning the tub with citric acid and baking soda
Take the baking soda and dissolve it in water so that it forms a pulp. Apply it to the surface of the bath and leave it for 1 hour. Dissolve the citric acid in water in a 1:1 ratio, spray the solution on the baking soda paste, and scrub with a sponge. Rinse off the rest of the remedy with lukewarm water.
How to clean the bath from yellowing – modern methods
Yellow plaque forms on the bathtub, mainly due to poor water quality. If you do not have the opportunity to put a filter, you will have to constantly clean the plumbing – it is better to do it regularly because stale dirt is more difficult to remove.
Take dry bleach, and dilute it with water in a ratio of 1:1. Then rub the bath with this mixture, allow it to dry, and rinse with water.
IMPORTANT: we advise you to use this option with caution because the chlorine in the bleach can destroy the enamel. It is generally contraindicated for acrylic bathtubs.
An alternative option from grandma’s pantry is to use baking soda, peroxide, and vinegar. These two remedies will definitely help you realize how you can clean a bathtub from yellowing and not spend a penny on it:
- Mix baking soda and peroxide so that you get a mush, apply it to the tub and rinse it off after half an hour;
- dilute 0.5 vinegar in warm water, fill the bathtub with it, and rinse in four hours, wiping all stains on the surface with a sponge.
Sometimes housewives use toothpaste to fight yellow plaque. The procedure is simple – you need to apply the paste to the problem areas, and after 5-10 minutes rub it with a sponge and rinse. There is a nuance – this method is suitable if the stains are local.
How to clean a rusty bath quickly and easily
The most effective means, which are used by housewives to get rid of rust, are considered peroxide and ammonia. Responding to the question of how to wash the tub with peroxide, we tell you – to combine 100 ml of ammonia and 50 ml of peroxide in one container, stir it, apply the solution to problem areas, and rinse with water after 10-15 minutes.
