Grinding and Sharpening Scissors: This is How Easy it is With Home Remedies

Sharpening scissors – that’s what matters

Scissors wear out with every cut, which is why a clean cut is no longer possible at some point. But before you buy new scissors, there are a number of ways you can sharpen your old ones.

• Aluminum foil: Fold up a wide strip of aluminum foil. It is sufficient if the film is in three to four layers on top of each other. By cutting off several strips of foil with scissors, sharpen the edges.
• Sandpaper: Alternatively, use 120 grit sandpaper to sharpen your old scissors. Cut through the sandpaper and turn it 180 degrees after each cut so that the scissors become evenly sharp.
• Whetstone: You can also sharpen your scissors on a whetstone, but you have to be very precise. You have to pull the cutting edges over the whetstone at an oblique angle. Don’t rub the blades at right angles across the whetstone or you’ll wear the scissors down even further.
• Knife sharpener: Of course, you can also sharpen your scissors with an extra knife sharpener. The tool is particularly recommended if you are not very experienced with whetstones or if you want to sharpen your scissors easily and quickly.
• Tip: Sharpen your scissors again and again at shorter intervals, this will keep them sharp for a long time. If you use the scissors frequently and cut a lot, you should sharpen the blades once a month.

Grinding and sharpening scissors – other options

• Hand sharpener: Unlike the professional knife sharpener, a manual knife sharpener works. While you only have to pull the blade of the scissors through the sharpening points on the first model, you should pay attention to your technique with the manual knife sharpener.
• You place the lower end of the blades at the bottom of the sharpener and pull them at a small angle, less than ten degrees, across the sharpening surface to the point. In the end, the tip of the scissors and the tip of the grinder should match. Repeat this step a few times, then perform the same motion for the other blade.
• Electric: A simple and quick method is an electric scissor sharpener. With these models, you do not need to pay attention to any technology or have any prior knowledge. The devices work independently and provide good results. However, the purchase price is slightly higher than that of many other grinders.